Close This Document

PLEXIGLAS^® SHEET:
POLYMERIZABLE CEMENTS (2-PART: COMPONENTS A AND B)

	If at all possible, store component B, the catalyst, under refrigeration but not below 40°F. If this is impossible, ensure that component B is notnstored in direct sunlight Preperably in a dark place. If component B turns yellow or amber, discard it using proper chemical disposal trchniques and obtain a fresh lot from the supplier.
	When mixing component A & B, be sure to use CLEAN containers. Ensure that disposable containers,not lined with a coating that will affect components A or B by cause improper curing.
	When mixing, both components should be at room temperature. ( It may be convenient to remove a one-day supply from refrigeration on the previous day).
	When components A & B are combined, ensure that they are continuously under agitation for two minutes to ensure complete mixing. Let air bubbles rise to the surface before using the cement.
	Combine components A & B in a ratio of 95 parts component A to 5 parts component B, either by weight or by volume. Do not use a mixture of less than 93 parts component A or more than 7 parts component B.

The statements, technical information and recommendations obtained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY, OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained herein should be construed as an inducement to infringe any patent, and the user is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.

See MSDS for Health and Safety Considerations.

© 2006 Arkema