TUFFAK®
TUFFAK® products (A, XL and CM2) meet the International Code Council (ICC) requirements for light transmitting plastics as outlined in chapter 26 of the IBC. These requirements include standards for self-ignition, burn rate and smoke density.
Self-Ignition Temperature (ASTM D 1929)
Plastic materials must have a self-ignition temperature of 650° F or greater. TUFFAK® A, XL and CM2 have a self-ignition temperature of about 1000° F.
Horizontal Burn Rate (ASTM D 635)
Plastic materials that have a burning extent of 1 inch or less have a CC1 classification. Plastic materials that have a burning rate of 2.5 inches per minute or less have a CC2 classification. TUFFAK® A, XL and CM2 have a CC1 classification since they self extinguish between 0.4 and 1 inch.
Smoke Density (ASTM D 2843)
Plastic materials must have a smoke density rating no greater than 75 where tested in the thickness intended for use. TUFFAK® A, XL and CM2 typically generate a smoke density value between 66 and 75.
The IBC limits the use of approved plastic materials. Limitations include the size of each panel, distance between panels as well as building type, height and location. Consult the prevailing code to ensure compliance.
A statement of IBC compliance for TUFFAK® A, XL and CM2 can be found in the ECC-ES report #ESR-1653. This report located on the web at:
http://www.icc-es.org/reports/pdf_files/UBC/ESR-1653.pdf
Flammability (UL 94)
TUFFAK® A, XL and CM2 have an HB classification with a minimum thickness of 1.5 mm. TUFFAKâ products are listed by UL under category QFMZ2 and Arkema file number E39487. This listing can be found at the following web address:
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
The statements, technical information and recommendations obtained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY, OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained herein should be construed as an inducement to infringe any patent, and the user is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.
See MSDS for Health and Safety Considerations.
© 2006 Arkema